Have feedback on the app? Email eugenes@trexfencing.com.

Get Started

Project state
Trex Fencing logo
Trex® FenceDesigner ™

Complete your estimate in three easy steps.

1. Project Inputs
Start by choosing the fence style, height, color, and post cap for your project.
1. Trex Fence Style
2. Height / Rails
3. Color
4. Post Cap
2. Quantity Inputs

Select how you want to build this estimate. You can switch methods at any time.

Entry method

Trex® FenceDesigner™

planning, layout quantities, and professional project summaries.

Post center reference (on-center): Seclusions 96", Horizons 97", Solitudes 96", Shenandoah 92.25".
Drawing instructions How to draw, place gates, and use the controls

Quick start

  • Post center reference (on-center): Seclusions 96", Horizons 97", Solitudes 96", Shenandoah 92.25".
  • Draw the main fence outline first.
  • Then add gates, fixed posts, buildings, or notes.
  • Click or tap near an existing post to continue from that point.
  • Drag an end post to stretch or rotate its fence run. Click the post without dragging to start a branch.
  • Gates and fixed posts snap to the closest fence line. Drag a gate onto another run to move it there.
  • Gates must be placed inside an existing fence run, so add the fence line on both sides first before placing a gate.
  • Use the joystick by clicking, holding, and dragging it to pan the canvas or satellite view.
Draw from a fixed post (square post)
＋ Fixed post → Click fence line → Click square post → Click + release to extend run

Tip: fixed posts are drawing anchors for branching a new run from inside an existing section (they are not a separate product).

Inputs explained

  • Fence System: changes spacing and material calculations for the selected system.
  • Angle: keeps runs on 45° and 90° or allows free angles.
  • Labels: shows or hides measurement labels on the drawing.
  • Undo: removes your last action.
  • Finish: ends the current fence run.
  • ＋ 🏠 adds a building for perspective or reference only.
  • ＋ Fixed post adds a fixed post snapped to a fence line.
  • Post spacing reference: Seclusions 96" OC (offset 0"), Horizons 97" OC (offset +1"), Solitudes 96" OC (offset 0"), Shenandoah 92.25" OC (offset −3.75").
  • Gate size + ＋ Gate chooses the opening size, then click a fence line to place it. Build the fence line on both sides first so the gate sits inside the run.
  • ＋ Note adds a note box for reference.
  • 🧹 Clear all clears the entire drawing and controls.
  • ⬇️ PDF downloads the drawing summary.
  • − 🔍 ＋ changes the current canvas or satellite zoom level.
  • Joystick click, hold, and drag it in the direction you want to move.
Search first, then use the buttons below.

Selected Object

Fence Segment
Drag Mode
Building / Note
Gate
Drag along the fence or nudge 6 in.
Fixed Post
End Post
Drag this post to stretch or rotate the fence. Click it to start another run.
Click to place fence points. Drag an end post to stretch or rotate a run. Select a line to move, split, or delete it. Drag a gate along its fence or onto another fence line. Use Control Z to undo and Control Y to redo.
View
Hold + move
Zoom: 10 px/ft
Ready to draw.

Summary

Fence Length (excludes gates) 0 ft 0 in
Suggested Sections (Panels) 0
Suggested Posts (5" × 5") 0
Avg Post Spacing 0 in
Gate Openings 0
Gate Summary None
Angle Adapters (Seclusions corners only) 0
Non-90° Corners 0
• Sections are calculated from the selected system’s max on-center spacing.
• On the canvas, every joint is treated as a post and additional posts are added so no span exceeds the max OC.
• Gate openings reduce the number of fence sections but reuse existing posts.
3. Results
Review your itemized materials, totals, and install estimate.
Choose a state to see pricing
Estimated Materials
Homeowner
—
Trex composite fence components only.
⚠️ Includes a $550 minimum order fee (20 panels or fewer).

Itemized materials

State-matched Trex pricing for the selected style.

Item Qty
Choose a state to load pricing…